2016 High Quality Low Price Chevron Rubber Conveyor Belt Made in China

• Type: Chevron Belt
• Material: Rubber
• Inside Material: Polyester
• Feature: Oil-Resistant, Acid And Alkali Resistant, Tear-Resistant, Heat-Resistant, Cold-Resistant, Wear-Resistant
• Tensile Strength: Strong
• Name: Chevron Conveyor Belt
• Model NO.: chevron conveyor belt
• Width Range: 500-2200mm
• Length Range: 100-500m
• Top Rubber: 3/4.5/6mm
• Bottom Rubber: 1.5/2/3mm
• Certificate: ISO9001
• Standard: GB,Rma,Sans,as
• Length: <=500m/PC
• Transport Package: Water-Proof and UV-Proof Cloth All Side
• Trademark: HYRUBBERS
• Origin: China
• HS Code: 401012
• Production Capacity: 30000m/Month

Product Description

Chevron Belt is suitable for handing bulk materials or bags up to 40°, has the advantages of slip resistant and big conveying capacity. Widely used for conveying chip & bark, fertilizers, grains and sand, quarry, coal etc.
 
The product advantages:
1. For bulk materials, hosting height can reach 17-18 degrees, and for bagged materials can reach 30-50 degrees.
2. The design between decorative pattern and pattern space can make the belt keep balance.
3. Pattern and baseband only need a sulfide, adhesion strength, better belt service life is longer.
 
 
Application field: patterned conveyor belt is suitable for sloping places to send containing water or loose or packaged materials. Decorative pattern design of conveying material to prevent slide, greatly improve the efficiency of delivery. Used in quarry, minning battlefield, cement, lime, mobile crushing and screening eauipment, farm and salt mine.
 
The product catefories: open V, L, H, Y type, tape A and F, etc. It can be designed for new pattern separately according to customers' requirements.
 

1.Physical and mechanical property of cover layer:

Property level of cover layer	Tensile strength≥	Tensile yield≥	Abrasion value≤
	Mpa	%	mm^3
H	24.0	450	120
D	18.0	400	100
L	15.0	350	200

 

2.Tensile property of through thickness:
a. The longitudinal tensile strength is not lower than the following nominal value: 160 200 250 315 400
b. The through thickness elongation rate of the belt should not less than elongation rate of trough thickness of the belt should no more than 4%,
c. Straightness: no more than 25mm.
d. plunger bond stength:

Index description	Strength between layers≥	Cover layer and fabric layer
		Thickness of cover layer≤1.5mm	Thickness of cover layer >1.5mm
Sample average value	3.2N/mm	2.1N/mm	2.7N/mm